Tabla de contenido
Publicidad
Slide Power Switch from OFF to Test (the
indicator light will flash twice once the micro
SD card was detected. and flash l time if no
micro SD card in it) then turn to ON
the camera powers on.
power switch from OFF to ON
After you inserted the Micro SD card (included)
to camera. connect with the computer by USB
cable (under TEST mode). and then the
camera will be a removable disk.
3.4.0N
In this mode. the camera works automatically
by motion detection. The indicator lamp will
flash approx lOs for
(Please don't slide the
buffering.
ENGlO
position.
directly)
Publicidad
Tabla de contenido
