II.Note for first use
1. Please read the instructions carefully.
2. Please check if all switches are in off position.
3. Please check that all accessories are complete.
4. Please tear off the protective film on the surface of the product, then wipe off the rust oil on the surface
of the product with a dry cloth.
5. The power supply voltage must match the voltage specified on this machine.
III.Operating Steps
1.Turn on the power switch.
2.Adjust the temperature you need.
IV.Care and Cleaning
1. Unplug the power cord and make sure the product has cooled down completely, then clean and collect.
2. Clean the cooking surface with a soft cloth or sponge moistened in a mild detergent.
3. Please do not use wire brushes, stiff brushes or other corrosive liquids to clean it, avoiding damage to the
surface coating.
4. Never clean the product by spraying water and immersing it in water.
V.Electrical diagram
S1: Power switch
S2: temperature display
HL1: Power indicator light (red, with power switch together)
HL2: Heating element work indicator light (green)
EH1: Heating element
8