Charger Operation - SNOWJOE SUNJOE 24V-150WI-CT Manual De Instrucciones

Technical Data
Output Power ............................................... 150 W continuous
Surge Power ............................................................. 300 W/2 s
DC Input | Battery Voltage Max* ................................. 24V D.C.
AC Output Voltage ...................................... 120 V A.C. | 1.25 A
USB Output Voltage ................ USB-A: 5 V/9 V/12 V, up to 3 A
USB-C: 5 V/9 V/12 V/15 V, up to 3 A
Output Wave Form ............................................ Modified wave
LED light ............................................................................. 1 W
Net Weight .......................................................... 0.6 lbs (270 g)
*Initial no-load voltage, when fully charged, peaks at 24 volts; nominal voltage
under typical load is 21.6 volts.
Unpacking
Carton Contents
• Portable power inverter
• Manual with registration card
1. Carefully remove the portable power inverter and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new portable
power inverter. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils or small
parts. These items can be swallowed and pose a suffocation
risk!
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this portable power inverter you will
need a iON+ 24V System battery and charger. For optimal
performance of this unit, it is recommended to use the
4.0 Ah battery (24VBAT) or greater. See page 11 for battery
and charger options and specifications, or for more
information visit sunjoe.com.
customer service center at
®
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level
is decreasing. Turn off the power inverter as soon as
possible.
• 1 level monitoring LED is lit: Battery is flat. Turn off the
power inverter IMMEDIATELY and charge the battery.
Otherwise the battery's service life will be greatly
shortened.
Lights Light Indicators
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
NOTE: If the charge level button does not appear to be
working, insert the charger and charge as needed.
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells "recover" some of their
charge after resting.

Charger Operation

m
WARNING!
Charge only Sun Joe
battery packs with the compatible Sun Joe
chargers. Other types of batteries may cause personal injury
and damage.
To reduce the risk of electric shock, do not allow water to flow
into the charger's AC/DC plug.
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this portable power inverter you will
need a iON+ 24V System battery and charger. For optimal
performance of this unit, it is recommended to use the
4.0 Ah battery (24VBAT) or greater. See page 11 for battery
and charger options and specifications, or for more
information visit sunjoe.com.
7
24V lithium-ion
®
24V lithium-ion
®