HOMCOM 800-138 Instrucciones De Ensamblaje página 5

To use the accessories of S Blade / Egg whipper / Dough blade
/Spiralizer Blader / Slicer&shredder blade
1. Place the unit base on a dry level surface.
2. Attach the bowl and snap the Bowl handle and rotate it clockwise until
it is fully locked on the Base.
3. Put down the Drive Shaft until it is correctly placed on the bowl.
4. Insert S Blade / Egg whipper / Dough blade /Slicer/shredder blade
into the drive shaft and release.
5. Add ingredients into pieces small enough to fit into the Bowl.
6. Attach lid with pusher and rotate it clockwise until it is fully locked into
the bowl.
7. Rotate the knob clockwise until it is on the "1"/"2"/"3" for continuous
processing, put down the food pusher with about 1lb force.
8. After processing food, rotate the knob anticlockwise until it is on the
"0 ", allow the blade stop rotating, twist the Cover towards unlock to
remove the cover.
Always switch off before removing the lid.
note:There is only one position for the Bowl to be locked onto the Base.
The unit won't operate if the Bowl is not correctly placed onto the Base.
When cover is UNLOCK, the safety mechanism on the cover and Bowl
will be in different position. The unit won't operate.
Important
Your processor is not suitable for crushing or grinding coffee beans,
or converting granulated sugar to caster sugar.
EN