Toparc 073395 Manual De Instrucciones página 4

WARNINGS - SAFETY RULES
GENERAL INSTRUCTION
These instructions must be read and understood before any operation.
Any modification or maintenance not indicated in the manual must not be undertaken.
The manufacturer shall not be held liable for any personal injury or material damage caused by use not in accordance with the instructions in this
manual. In the event of a problem or uncertainty, consult a qualified person to handle the installation correctly.
This manual describes the assembly of this product. Any user who does not strictly comply with the safety instructions described in this manual may
be exposed to electrical risks and/or a serious or even fatal accident.
ELECTRIC SAFETY
During any intervention on the product, make sure to secure the area by keeping at a distance any person who has not read the instructions of safety
described in this manual. This product should preferably be installed by a professional in accordance with the installation rules in force in the country.
If not, it is recommended that you read these rules before working on it.
PRECAUTIONS AGAINST ELECTROSTATIC DAMAGE
Static electricity can damage electronic equipment. Use a grounded anti-static wrist strap, an ankle strap, or equivalent safety device
to prevent electrostatic damage (ESD) when installing this product.
Electrostatic damage can irreparably damage the generator. To protect electronic components from electrostatic damage, place this product on an
antistatic surface, such as an antistatic discharge mat, antistatic bag, or disposable antistatic mat.
KIT CONTENTS
Flowmeter
3>30 L/min
70983
PRESENTATION
The flowmeter kit allows to regulate and control precisely the gas flow at the torch outlet, when it is connected to a gas network. The gas pressure
of the network must be stable and between 2 and 7 bars. The flow rate can be adjusted between 3 and 30L/min.
COMPATIBILITY
To check the compatibility, a label indicating the date of
manufacture is stuck on the back of your product:
Compatibility
NEOPULSE 320 C
PULSEMIG 320 C
NEOPULSE 400 CW
PULSEMIG 400 CW
NEOFEED-4W
PULSFEED-4W
4 4
GAS FLOWMETER
x 6
Fittings Hose clip
55135 71225
Date of manufacture (year / month)
062474
From 22.08
062641
062061
From 22.07
062658
014527
From 22.08
062689
Fittings Ø 6mm Hoses 250 mm
55321 71434
Year
Month
22.07.XX
XXXX.XXX
XXX
EN
Support plates