Scope Of Delivery; Technical Data; Safety Instructions - JMP Skan Boost 4000 Manual De Instrucciones

Skan Boost 4000
Jump starter
JM No. 609 03 55

Scope of delivery:

JMP Skan Boost 4000, power cable
Thank you very much for choosing a JMP Skan Boost 4000 jump starter. The JMP Skan Boost 4000 jump starter
is designed for starting cars, vans, light trucks, boats, campers (RVs), motorcycles, scooters, quads, etc.

Technical data:

12 V / 800A continuous, 4000A peak current
Dimensions: 260 x 135 x 72 mm, weight: 2.5 kg, connection cable: 0.5 m, auxiliary battery: 9V (6LR61)
Charging voltage: 14.5V max., charger: 230V / 50Hz
Recommended for use between -10 and +40°C
Suitable for:
• Standard lead acid
• Gel
• AGM
• EFB
• Lithium (LiFePO4)

Safety instructions:

• Read these operating instructions carefully prior to using the jump starter. A failure to observe these safety
instructions may result in severe injuries.
• Use for any applications not stipulated here is prohibited.
• Do not use the device in a potentially explosive atmosphere or in the vicinity of flammable material, as sparks
can develop that could ignite dust or fumes.
• Keep out of reach of children. This device is not a toy and should not be used as such.
• Do not inhale any gases emerging from the battery.
• Battery acid is caustic. In the event of unintentional contact between the skin or eyes and acid, rinse the skin
off and the eyes out immediately under flowing water and consult a doctor.
• Use the jump starter in a dry, well ventilated atmosphere and avoid damp.
• Ensure that the device is in a flawless condition prior to use.
• No warranty claims will be entertained in the event of improper use of or interventions in the device.
• Always wear safety goggles and safety footwear when connecting and disconnecting the battery, and keep the
battery away from the face.
• Never touch the two terminals against each other.
• Interventions in the device or power supply cable for the purpose of repair and maintenance should only be
undertaken by skilled personnel.
• Switch off all unnecessary consumers in the vehicle prior to connecting the device.
• Ensure that device cables are kept away from moving parts, fans or fuel lines.