Carton Contents - SNOWJOE SUNJOE SDJ617E Manual Del Operador

Unpacking

Carton Contents

• Funnel cover
• Funnel
• Motor housing
• Upper frame (x2)
• Lower frame
• Feet (x2)
• Thread forming screws (x4)
• Frame knob (x2)
• Bolt (x2)
• Wheels (x2)
• Hub caps (x2)
• Axle
• Washers (x4)
• Cotter pins (x2)
• Additional cutting lines (x20)
• Clean-out tool
• Manual with registration card
1. Carefully remove the electric leaf mulcher + shredder and
check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
+ Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the mulcher + shredder.
The packaging is made of recyclable materials. Properly
dispose of these materials in accordance with local
regulations or save the packaging for long-term product
storage.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
m
WARNING!
Do not connect to the power supply
until assembly is complete. Failure to comply could result in
accidental starting and serious personal injury.
1. Insert the axle through both sides of the lower frame
(Fig. 1).
customer service center at
®
2. To assemble the wheels, first place a washer over the
end of the axle. Then place a wheel and another washer,
before inserting a cotter pin through the holes on end of
the axle. Bend the legs of the cotter pin to secure it to the
axle. Finally, snap the hub cap onto the wheel and repeat
the procedure for the other side (Fig. 2).
Fig. 2
Cotter pin
Wheel
Washer
Washer
Hub cap
Axle
3. Attach the feet on the lower frame using two of the
provided thread forming screws (Fig. 3).
6
Fig. 1
Lower frame
Axle
Cotter
pin