Install The Battery Pack; Remove The Battery Pack; Operation; Start The Machine - GreenWorks FN24A01 Manual Del Operador

EN
8.2

INSTALL THE BATTERY PACK

• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the motor stops before
you install or remove the battery pack.
• Read, know, and follow the instructions in the battery
and charger manual.
1. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
2. Push the battery pack into the battery compartment until
the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.3

REMOVE THE BATTERY PACK

1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
9

OPERATION

Do not use any attachments or accessories not
recommended by the manufacturer of this product.
WARNING
WARNING
English
9.1

START THE MACHINE

2
1. Install the battery pack or connect to the AC power
supply
2. Press the ON/OFF switch to turn the machine on. The
machine will be turned on at lowest speed.
3. To turn it OFF, press the ON/OFF button again.
• Do not continue to press the ON/OFF button after the
jobsite fan has automatically switched off. The battery
can be damaged.
• S hook can be used for hanging. Be careful not to hang
the fan in such a way that it prevents normal fan
operation.
9.2

STOP THE MACHINE

1. Press the ON/OFF switch to turn the machine off.
9.3

ADJUST THE SPEED

Lights
One green light Speed one - 665CFM
8
5
WARNING
4
Speed level