Dahlert DT-SJ-19 Manual De Instrucciones página 8

08
COMPONENT DETAILS
01
/ Hopper
① Upper hopper chute: Use this to insert long and narrow vegetables such as celery and carrot.
② Side hopper chute : Use this to insert cherry tomato, grapes, and diced fruits and vegetables
③ Assembly Guide Mark on Hopper : Marks to check the assembly with the chamber.
Parts must fit properly in order to work.
02
Chamber
/
① Juice Cap / Juice Cap Packing: A cap for preventing juice from being discharged in case of
extraction. The juice cap packing is assembled inside the juice cap.
② Pulp / Ice Cream Outlet: An outlet for discharging extraction pulp or ice cream.
③ Discharge Cover / Discharge Cover Loop: The lower part of the pulp outlet.
If not properly assembled, it will leak juice.
④ Extraction Packing: This packing is assembled in the discharge cover.
If not properly assembled, it will leak juice.
⑤ Seal Packing: This packing is assembled in the discharge cover.
If not properly assembled, it will leak juice.
⑥ Chamber Assembly Guide Mark: This guide mark is used when assembling with the hopper.
Proper assembly ensures normal operation.
⑦ Filter Binding Groove: Chamber grooves that fix the filter wings.
⑧ Chamber Bottom Groove: Grooves for fixing the ice cream strainer and inner filter.
⑨ Chamber Packing: Packing in the middle of the chamber. If not properly assembled,
it will leak juice.
4DC01742 사용설명서 DT-SJ-19(102-A2) 7개국어_V.00.indd 8
⑨
②
④
③
①
②
③
⑦
⑥
(Closed)
⑧
①
⑤
(Open)
2019-08-13 오후 6:28:01