Installation Of Base - Newskill ICARUS RGB 27 Manual Del Usuario

3. Installation of base

EN
Keep the foam underneath the monitor before attaching the stand.
8
ICARUS SERIES
1
Open the package to take out foams and put them on a flat tabletop.
2
Take out the base and stand, and use the thumb screw of the base to lock the stand.
Align the base and stand components assembled in Step 2 to the slot of the machine and
3
clip them. (Note: Slide the quick disassembly button up with fingers to take out the base
and stand components)
thumb screw
Quick-disassembly button