HEALTHYBAND
Smartband
User manual
BXSEASHR02
Technical information
Display: 0,96", 80x160 resolution
Bluetooth: 4.0
Battery: Polymer-lithium
Battery capacity: 90mAh
Battery life: 3 days (normal use) / 7 days (stand-by)
Charging time: 1.5-2 h
Charging type: clip charge
Waterproof rating: IP67
Sensor: G-Sensor 3 axis
Strap: Silicone
Strap size: 240 x 16 x 11,9 mm
Working temperature: -10°C - 45°C
Weight: 20 g
System requirements: Android 4.4 and following versions, iOS 8.0 and following versions
APP: Wearfit
Compatibility
• iOS 8.0 and above
• Android 4.4 and above
HOW TO CHARGE YOUR FITNESS BAND
Connect the fitness band to the included USB charging clip. Once connected, connect the
USB to a USB power source, such an 1A adapter, a laptop or a power bank for a minimum of
15 minutes. Then, the device will turn on automatically.
It takes 2 hours to charge the device completely. Once it has been charged fully, the device
can be on up to 7 days.
HOW TO TURN YOUR FITNESS BAND ON AND OFF
Long press the central button when your fitness band is off to turn it on. Once the device
has vibrated, short press the central button to start moving from one function to another.
Long press the central button when your fitness band is on to turn it off. An "ON/OFF" icon
will appear on screen. Short press and then long press until the device vibrates to turn it
off. Long press to escape the "ON/OFF" screen and go back to functions. Please note it is
not possible to turn the device off from the stopwatch/find phone/SMS/background func-
tion.
HOW TO PAIR YOUR FITNESS BAND WITH YOUR SMARTPHONE
1. Search "Wearfit App" on App Store or Google Play, or scan the
following QR code:
2. Open your device Bluetooth settings before pairing
3. Tap "Scan device" to select the fitness band you want to pair.
Note: Some Android phones cannot find the fitness band using
just Bluetooth at first. Please, enable the GPS function in your
phone if this happens. If your phone still cannot find the device,
enable and disable flight mode.
What to do if your smartphone cannot find the fitness band and, therefore, cannot
connect to it
Please, ensure your smartphone Bluetooth is on and that its operating system is Android
4.4 or above versions / iOS 8.4 or above versions. Also, make sure the fitness band is fully
charged.
If connection is not possible yet, enter the smartphone settings. Then, enter the app
management settings, allow all permits and turn the GPS location. Finally, restart the phone
and try to connect again.
What to do if the app does not recognize connection or shows the fitness band has a 0%
battery level