Montarbo SW 540 Manual De Instrucciones página 13

Connection examples
NOTE:
Our configuration examples are using the L and R master outputs
of the mixer, but if they are already taken up (as, for example, in
a powered mixer) the insert sockets on main L/R outputs can
be used to the same purposes.
WIRE ThE STEREO jACk PLuG AS ShOWN
TIP RING GNd
connect ring with tip (shortcircuit)
INSERT SocKET
of THE MIXER.
Parallel connection of two or more systems
The SW540 is equipped with XLR male and female sockets
wired in parallel. This makes daisy-chaining easier.
mixer L/R outputs ➟ 'R/ ' inputs of two SW540
mono
SW540 'link' ➟ SW540 'R/
mono
 See connection example on page 37
All manuals and user guides at all-guides.com
RING
TIP GNd
' input.
Take out the signal from the insert sockets by means of a stereo
jack plug, in which you have previously joined the RING with the
TIP and send it to the inputs of the subwoofer by means of an
unbalanced XLR.
WIRE ThE XLR MALE CONNECTOR AS ShOWN
2 +
3 GND
connect 1 with 3 (shortcircuit)
1 GnD =
GnD
2 + =
HoT
3 - =
GnD
SW540
Active subwoofer
1 GND
1 GND
2 +
3 - GND
INPuT ( ) of A
xLR fEmALE
SW540 oR of A POWEREd
SATELLiTE SPEAkER
13
ENGLISH