Getting Started - Signature SKSFD4826P Manual Del Propietário

en-us_main.book.book Page 12 Tuesday, January 10, 2023 2:32 PM
12 OPERATION
b
• Appears when Smart Grid function is on
• Appears when the refrigerator is responding to a Demand Response (DR)
message from the electric company
c
Appears when Demo Mode is on
d
Appears when the refrigerator is connected to Wi-Fi
e
Appears when Screen Lock is on

Getting Started

After turning on the refrigerator for the first time,
adjust the settings to suit your preferences.
1
Set the date. Then press NEXT.
2
Set the time. Then press NEXT.
3
Select the clock theme. Then press NEXT.
4
The main screen appears in the display.
Settings
To adjust settings after the initial setup, press
Settings at the right bottom of the main screen.
Swipe the screen to navigate through the Settings
screens.
Smart Grid
Demo Mode (For Store Use Only)
Wi-Fi
Screen Lock
Water Filter
The remaining filter life will be displayed as a
percentage from 100% to 0%. Reset the filter life
after replacing the water filter.
Reset the Filter Life
1
Press Settings at the right bottom of the main
screen. The remaining filter life appears.
2
To replace the water filter, refer to Replacing
the Water Filter.
3
Press RESET after replacing the water filter.
4
The remaining filter life changes to 100%.
Wi-Fi
Connect the appliance to a home Wi-Fi network to
use smart functions. See the Smart Functions
section for more details.
Setting Up Wi-Fi
1
Press Settings at the right bottom of the main
screen and then press Wi-Fi.
2
Press Set Up Wi-Fi.
3
Follow the instructions on the display.