Kalorik TKG CEH 2000 W Manual página 7

INSTALLATION
•
Unpack your appliance and remove all the plastic bags and labels from it.
•
Clean it from dust using a dry cloth.
•
Install it in a room larger than 4m², away from water.
•
Secure air circulation space at least 50cm above the appliance and 1m in front of it.
•
The appliance should not be placed directly under the power socket.
Portable use as standing heater
•
Fix the feet on the appliance bottom side with the supplied 12mm screws (8pcs).
Use as a wall mounted heater
• Drill 4 holes in the wall and insert expanded plugs inside.
•
Secure the wall-mounting brackets into the wall with screws of the appropriate length
depending on your wall consistency.
•
Fix the appliance on the brackets and secure it with the provided screws.
OPERATION
• Plug in the appliance into a suitable outlet (AC power supply, 220-240V~ voltage).
•
Turn on the appliance by press the side power switch on.
•
Press the On/Off key to light up the LCD screen. It will automatically show the room
temperature.
•
Press the mode key to set the heating power. The appliance always starts in low mode.
= Low heating mode
= High heating mode
•
Select the desired temperature between 5 to 40°C using the + and – temperature keys.
•
Press the timer key to set the desired use time between 1 and 24 hours.
The display screen will show the time elapsing until the appliance turns off.
To deactivate the timer, select the time 00.
• Press the child lock key for 3 seconds to deactivate the tactile control panel.
To reactivate it, press again the child lock key for 3 seconds.
Notes :
• Even when the control panel is locked, the On/Off key can still be used to switch off
the appliance.
• The appliance emits a sound each time you press a function key.
REMOTE CONTROL
•
The remote controls the functions of the appliance identically as the control panel.
• Target the remote sensor lens on the control panel for best results.
• The batteries are replaceable – reference : CR2025
7 TKG CEH 2000 W