Signature Design by Ashley 2150613 Instrucciones De Montaje página 4

4. To install the back, align the female brackets in the back with the male brackets in the chair base, slide the back down on the base.
See Figure B Push down on the top of the back to lock the back into posi�on. You will hear a click from each side of the chair to
ensure the back is locked in properly.
Figure B
Snap
5. If your model has back wings, align the male the female brackets and slide the wing down into place, See Figure C. Please Note
there is a label on the brackets. Please assemble them as 1-1 and 2-2.
Figure C
1
6.Plug the Lumbar and Headrest, See the Figure D. If your model is Headrest Only, you only need to plug the Headrest.
Figure D
Lumbar
Headrest
Lumbar
Headrest
Aug. 2022
SIGNATURE DESIGN BY ASHLEY
All Rights Reserved. 00145F Page 4 Of 23