HTW SMART PLUS -TV-030SMPLUS Manual De Usuario E Instalacion página 17

Connection of pipelines
The dimension of multifunction
valve and the inlet /outlet pipe is
" BSP.
Connectionofmultifunctionvalve:
install the multifunction valve
with the heater on the inlet of the
water heater.
In order to avoid leakage when
connecting the pipelines， the
rubber seal gaskets provided
with the heater must be added at
the end of the threads. Ensure
leak proof joints.
Multi outlet connection
If the users want to install a multi-way supply system, refer to the method shown
in Fig.4 for connection of the pipelines.
Triple joint
Water pool
Screw for hot water outlet
Adjusting handle for
TYPICAL SINGLE OUTLET CONNECTION
Hot water Cold water
outlet inlet
Mixing valve
Hot water outlet
mixing Valve
Shower nozzle
Power supply cord
Heater
Multifunction valve
Water inlet valve
Water inlet valve
14
ELECTRIC
WATER HEATER
SMART PLUS
Power supply cord
Cold water inlet
Multifunction valve
Pressure release hole
Joint screw for
cold water inlet
(Fig.4)
Shower nozzle
Running water pipe
(Fig.5)