Required Information; Intended Use; Safety Information - Miracle-Ear LINK Mic+ Manual Del Usuario

Troubleshooting
SYMPTOM POSSIBLE CAUSES
LED is slowly Hearing aids are not
pulsing green paired with
or blue, but no
Miracle-EarLINK
streamed sounds
Mic+.
are heard in the
No incoming audio
hearing aids.
signal is available.
LED is solid red. Possible error
condition.
Input Mode Something is absent
LED is rapidly from current audio
blinking. source.
Input Mode LED Input Mode LED
is not illuminated. is turned off to
conserve battery
power.
Desired Input Something is
Mode not missing from
available. desired input.
Unable to pair Miracle-EarLINK
with more than
Mic+ is already in
one Bluetooth
an active Bluetooth
device.
connection.
Unexpectedly Some Bluetooth
lose TV (optional device sounds are
higher priority than
product) audio
while LED is slowly TV Streamer audio.
pulsing blue on
Miracle-EarLINK
™
Mic+
22
SOLUTIONS
Follow steps in Pairing with
Hearing Aids section.
™
• Turn on the electronic
audio source.
• Unmute or increase
volume on electronic
audio source.
• Ensure loop or FM system
is present.
Turn off Miracle-EarLINK
™
Mic+, wait 30 seconds, and
then turn it on.
Attach line-in cable, attach
FM receiver, or reestablish
your Bluetooth connection.
Press Input Mode button to
illuminate the Input Mode
LED.
Attach line-in cable, attach
FM receiver, or reestablish
your Bluetooth connection.
Follow steps in Pairing with
™
Bluetooth Devices section.
Move out of Bluetooth
input mode on
Miracle-EarLINK Mic+.
™

Safety Information

Safety Information

Required Information

Waste from electronic equipment must be handled according
to local regulations.
Instructions for Disposal of Old Electronics
Miracle-Ear encourages, and your local community laws may require,
®
that your Miracle-EarLINK Mic+ be disposed of via your local electronics
™
recycling/disposal process.
The below instructions are provided for the benefit of disposal/recycling
personnel. Please include this manual when disposing of your
Miracle-EarLINK Mic+.
™
For Disposal/Recycling Personnel Only
This product contains a Lithium-ion Polymer battery. To remove this
battery:
• Power off the Miracle-EarLINK
• Pry apart the housing halves with a small screwdriver.
• Cut the battery wires from the circuit board to prevent accidental
shorting.
• Pry the battery away from the housing using a wide flat blade.

Intended Use

The Miracle-EarLINK Mic+ is an accessory to a 2.4 GHz wireless air
™
conduction hearing aid. It is intended as a wireless transmitter of sound
from a variety of audio sources to air conduction hearing aids. When worn
by a distant speaker in noisy environments, it functions as an assistive
listening device. It also connects to loop signals, FM signals when an
Europin FM receiver is attached, analog line-in audio, and standard
Bluetooth audio.
The Miracle-EarLINK ™ Mic+ is classified as a Type B applied part under the
IEC 60601-1 medical instrument standard.
The Miracle-EarLINK Mic+ is designed to operate in public and
™
residential environments and are designed to comply with international
Electromagnetic Compatibility emissions and immunity standards for
medical devices. However, it is still possible that you may experience
interference caused by power line disturbances, airport metal detectors,
electromagnetic fields from other medical devices, radio signals and
electrostatic discharges.
The Miracle-EarLINK ™ Mic+ is designed to be cleaned with a damp cloth
moistened with soapy water.
Mic+.
™
23