Oxygenics PowerBlast RV Instrucciones De Instalación

P
ower
EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your existing
shower head. To
remove, simply
unscrew the shower
hose from the faucet
by turning the hose
end counterclockwise.
STEP 4
In a clockwise
direction, screw end
of hose to the taped
portion of the faucet.
Hand tighten only.
EASY TWIST SPRAY
SELECTION
Enjoying multiple spray
patterns during your shower
has never been easier. With
the PowerBlast's easy twist
design, simply rotate the easy
spray selector for a quick spray
change.
PRESSUREWASH SETTING IS
VERY POWERFUL – USE WITH CAUTION
B
last
STEP 2
Remove any remnants
of old plumbers tape.
STEP 5
Attach other end
of hose to base of
handheld and hand
tighten.
HOW TO ENGAGE
PRESSUREWASH
SETTING
Press button on back of shower
to activate the PressureWash
setting.Release button and the
PressureWash setting stops.
Rotate face of shower head to
change angle of spray.
ATTENTION:
rV
STEP 3
(Optional) Wrap
plumbers tape
clockwise 2 or 3 turns
around threaded end
of faucet mount.
STEP 6
Attach double stick
tape provided to back
of holder and press
firmly to clean, dry
shower wall. Place your
new handheld shower
head into holder.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
775-420-5600
or
LIVE CHAT:
www.oxygenics.com
EMAIL:
support@oxygenics.com
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST*
*Closed on all nationally observed holidays
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.