Insertion And Removal - Miracle-Ear ENERGY 5 BTE R EV Manual De Instrucciones

Preparation

Insertion and Removal

To insert the custom earmold and
hearing aid:
1. Hold the custom earmold with your
thumb and forefinger on the outer
side near the tubing.
2. Tilt your hand slightly forward and
gently insert the canal tip of the
custom earmold into your ear canal.
3. Rotate the custom earmold backward.
4. Softly press the custom earmold
into place with your fingertip.
5. Carefully place the hearing aid
behind your ear wrapping the
earhook over the top of your ear.
To remove the hearing aid and custom earmold:
Take the hearing aid from behind your ear and gently pull the
custom earmold outward. Pulling lightly down on the earlobe may
help loosen the custom earmold as it is removed.
10
1
2
4
3
5
To insert the comfort earbud:
1. Insert the comfort earbud into your ear canal.
2. Gently wrap the hearing aid over your ear
until it rests securely behind your ear.
3. Place the lock in the concha bowl of your ear.
To remove the hearing aid and comfort earbud:
1. Remove the lock from the concha bowl of
your ear.
2. Remove the hearing aid from behind your ear.
3. Gently grasp the tubing at the opening of the
ear canal and pull outward.
Preparation
1
2
3
11