Home 50386 Manual página 10

4. Drop essential oil into the water tank vertically. The dosage is about 2-3 drops (about
0.1–0.15ml) per 1OOml of water (FIG 3).
5. Install the upper cover onto the main body. The upper cover must be in use when the
diffuser is working (FIG 4).
6. Connect the adaptor plug to the household power supply.
7. Press the LIGHT button to choose the mode of the LED light. Each time that is pressed,
the color and brightness will change (FIG 5).
8. Short-press the "Mist" button and the green indicator will turn on. In this mode,
the device will operate in intervals (30 seconds on, 30 seconds off). Short-press the
"Mist" button again and the red indicator will turn on, indicating the diffuser is running
in continuous mode.
9. Press the "Mist" button to turn the mist function on (FIG 6).
- When the power is supplied to the diffuser, it will be in standby mode.
- If the water level in the tank is low, the diffuser will turn off automatically.
10. If you do not use the diffuser for a long time, please drain out the water from the
tank and dry it before storing. When it is used again, please use a neutral detergent to
clean the water tank again before use.
ATTENTION
- Factors that affect: water type, humidity, temperature and air currents.
- The unit will not work without water.