Venga VG RVC 3000 BK Manual De Instrucciones página 14

ENGLISH
EN
Cleaning the robot's rolling brush, side brush,
swivel wheel and sensors.
1. Remove the brush cover by simultaneously pushing the two tags holding it, then remove
the rolling brush. Clean the suction inlet with a cloth.
2. Clean the rolling brush: if any hair, threads or yarn got stuck, simply cut them loose with the
help of the cleaning tool that has been provided with your robot. Then carefully remove
everything. Only if the rolling brush can rotate freely, your Venga! robot can operate at
peak performance.
3. Remove the side brushes, use a cloth to remove the dust from the brushes.
4. Pull out the swivel wheel, then clean it with the cleaning tool.
5. Dust off the cliff and anti-collision sensors to maintain optimal performance.
6. Clean the charging contact pins of the charging dock and the robot with a clean, dry
cloth.
14 - VG RVC 3000
VG RVC 3000_[IB]-7L_NEW.indd 14 VG RVC 3000_[IB]-7L_NEW.indd 14 16/06/22 13:24 16/06/22 13:24