Premium levella PB360 Manual De Instrucciones página 3

WARNING: The blade is sharp, handle with great care and make sure you unplug the
appliance from the outlet before assembling and removing parts.
OPERATION
1. Place the motor unit on a flat horizontal surface and make sure it is unplugged.
NOTE: There is a safety interlock device at the bottom of jar, if the jar is not
assembled in place, the blender will not operate.
2. Open the jar cover by turning anticlockwise and place it on the surface. Peel or core the
fruits or vegetables, cut them into small pieces, then put them into the jar. Usually
certain amount of water or other liquid has to be added to ease the smooth running of
the appliance. The amount of mixture should not exceed the max level indicated on the
jar, nor sit lower than the min level. The best proportion of the fruits or vegetables and
water is 2:3.
EXAMPLE
FOOD TYPE
Carrot
NOTE: The blender is not good for beating egg whites, mashing potatoes, mixing dough,
or extracting juice from fruit and vegetables.
3. Replace jar cover on the jar and turn it clockwise.
NOTE: There is a safety interlock device at the side of jar cover, if the jar cover is not
assembled in place, the blender will not operate.
4. You may add ingredients into the jar through the center opening of the jar cover during
operation, and then replace measuring cup if necessary. Let the tabs of the measuring
cup aligns with the grooves of the jar cover, place down and turn the measuring cup
clockwise until it locks in place.
5. Ensure the Speed Selector is set to the "OFF" position, then plug into the power outlet
and set the Speed Selector to your desired setting. You can press down the Pulse
button without releasing it if you want to accelerate the process of blending. The
detailed information is shown in fig. 2.
SPEC
Cut into 15mm*15mm*15mmm
WEIGHT
Carrot: 600g
Water: 900g
3
SPEED
High speed