Technical Specification - Rapid BHX30 Manual De Instrucciones

BHX30 BATTERY PRUNER
Original instructions
TOOL PARTS DESCRIPTION
A. Pruner
A1. Movable blade
A2. Fixed blade
A3. Latch pin
A4. Trigger
A5. Power button
A6. Lubrication hole
B. Lithium Battery
B1. Battery release button
B2. Battery input connector
C. Battery charger
C1. Power input connector
C2. Charger LED light indicator
C3. Charging jack
D. Tool kit
E1. Insert battery into pruner
E2. Battery charging
F. Symbols
F1. Please read through all safety warnings and
instructions carefully.
F2. Battery can only be charged indoors.
F3. Double insulation; grounding not requried.
F4. Fail-safe transformer charger.
F5. Battery charging will automatically cut off when
overheating occurs.
F6. Do not use or expose pruner in/to rainy condi-
tions.
F7. Never place hands near the cutting area of the
pruner during operations.
F8. Never touch charged objects with electric scis-
sors.
F9. Electrical equipment cannot be disposed of with
household waste.
F10. Warning symbol, with information about perso-
nal injury.
INTRODUCTION
This tool is intended for cutting or trimming branches
in fruit orchards, vineyards, etc. with a maximum
diameter of 32mm.
The pruner should only be used for the intended
purposes.
If this tool is used for other unapproved purposes,
it may cause damage to the tool and cause harm to
the user.
This tool shall only be used by adults or by young
people under the supervision of adults.
The operator or the user shall assume full responsibil-
ity for any harm to others or any damage to property
caused by any accident occuring during use.
The manufacturer shall not be liable for any damage
caused by non normal or improper use.

TECHNICAL SPECIFICATION

4
BHX30–BATTERY PRUNER_Manual_20220713.indd 4 BHX30–BATTERY PRUNER_Manual_20220713.indd 4
Battery pruner, model number
Full opening cutting capacity
Half opening cutting capacity
Tool dimensions H*W*L
Weight
Battery model, type, voltage Detachable model KH-B1A16BX, Li-lon, 14.4V
Battery capacity, power, max power
Battery charging conditions
Battery storage conditions
Battery charger 16.8V D.C, 1.42A, terminals for two batteries,
Charging time
Cut per charge, max
Cutting speed, max continuous
Operation conditions
GENERAL POWER TOOLS SAFETY WARNINGS
WARNING!! Read all safety
warnings, instructions, illus-
trations and specifications
provided with this power
tool.
Failure to follow all instructions
listed below may result in elec-
tric shock, fire and/or serious
personal injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-ope-
rated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep your work area clean and well lit. Clut-
tered benches and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of
electric shock if your body is grounded.
BHX30
32 mm
15 mm
100 x 50 x 285 (mm)
0.9 kg (incl. battery)
2500 mAh, 100W, 500W
+4°C to +40°C
-20°C to +50°C
100-240V A.C, 50-60Hz, 0.5A input
sequence charging
120 minutes/each battery
≈ 3000 cuts
30 cuts/min
+4°C to +40°C
2022/8/10 2022/8/10 10:41 10:41