Waves HM-124841.1 Manual De Instrucciones página 97

HM-124841.1 / HM-124841.2
PARTS DESCRIPTION
1. Eject button
2. Speed control
3. Turbo button
4. Handle
5. Beaters
6. Dough hooks
BEFORE FIRST USE
1. Carefully unpack the hand mixer and remove all packaging material.
2. Clean the various accessories of your appliance in warm soapy water, rinse and dry thoroughly before use.
INSTRUCTION FOR USE
1. Be sure speed control is in the "0" position and the appliance is unplugged from the electrical outlet.
2. Insert beaters/dough hooks singly at a time, by placing stem end of beaters/dough hooks into the opening
on the bottom of the mixer. Only assemble the provided beaters or dough hooks into the appliance.
Note: the beaters can be inserted in either socket, as the beaters are identical. Turn beater slightly and push
in until it clicks into position.
For dough hooks, the one with washer can only be inserted into the bigger socket and the other one can only
be inserted into the smaller one. The two dough hooks cannot be inserted in reverse.
3. Plug into appropriate outlet.
4. Place the ingredients into a bowl suitable for mixing purposes, grip the mixer handle, and position the
beaters in the center of the food to be mixed.
5. Turn mixer on and adjust speed setting using the control on the top. There are 6 speed settings to be selected.
When kneading yeast dough, suggesting to select the speed control by lower speed and then by higher speed
to achieve the best results. The appliance will run at the highest speed when pressing the turbo button.
- 96 -
EN