Publicidad
Idiomas disponibles
Idiomas disponibles
Roger Beep (ON/OFF)
The Roger Beep function enables a short tone signal which is transmitted after releasing
the PTT button. Press "
Press "
" or "
Press PTT to confirm and quit. After turning on Roger beep, LCD will display the RGR icon.
Auto Power Off (APO)
This function may help to save battery energy in case that You should forget to switch off a
radio after use. Press "
Key to select auto power off time from 0 to 12 hours. Press PTT button to confirm and quit.
Or press "
" Key once to quit. After turning on this function, LCD will display the icon
and will automatically turn off the radio at designated time.
Scanning Channels
Press "
" Key, LCD displays icon
Note: If you press and hold the button longer than 2 seconds, it will break the squelch
noise and listen to the current channel. The unit scans all channels one by one. It will stay
on the occupied channel. Press "
signal, it will continue to scan. Press the PTT key and it will stay on the scanned channel
and quit scan function.
Key Lock
Press and hold "
except the PTT and "
again. In FM broadcast mode, this key works as toggle switch between the frequency
setting and the volume setting, too.
" Key 9 times, the LCD will display "Roger".
" Key to turn on (display shows icon) or turn off (display shows icon)
" Key 10 times, LCD displays icon
" or "
" key for 1.5 seconds, LCD displays the icon
" keys. To unlock, press and hold "
. It will start to scan all channels automatically.
" Key to continue scanning. If there is no
EN
. Press "
" or "
. All keys are locked
" key for 1.5 seconds
"
Publicidad
