Important - HairMax LaserComb Ultima 9 Manual Del Usuario

IMPORTANT: Do not lift your HairMax off your head when moving from front to
back (unless you are checking the usage timer on the information display or until
you complete the pass). Your HairMax features a pair of comb teeth that part
the hair so the light can more effectively reach the scalp. You will make a few
complete passes over your scalp within the recommended treatment time.
When your HairMax is on, it will beep and vibrate every four (4) seconds. This
means that it's time to move your HairMax to the next area of the scalp. When
you do this, do not lift the device off of your scalp.
If you wish to turn off the beep/vibration during
the treatment, press the top laser button once. Your
HairMax and laser will remain on. To re-activate
beep and vibration, simply press the laser button
twice.
Turn off your HairMax by pressing and holding the
power button (lower button) until indicator light
turns off. Store the device in the charging cradle for
future use. You may leave the power cord plugged
into the charging cradle at all times.
Please Note:
It is important to move your HairMax very
slowly. Remember, you are bathing the scalp
with laser light. If you move it too fast, the
treatment will not achieve the optimal results
to promote hair growth.
The information display on the top of your HairMax
Ultima 9 and Ultima 12 will show your elapsed
treatment time. The outer circle will represents the
number of seconds of usage. The number on the middle
represents the number of minutes that you have been
using your HairMax.
This example shows that you have been using your
HairMax for 4 minutes and 45 seconds.
The Ultima 9 Classic and the Ultima 12 Classic do not have a timer.
TROUBLESHOOTING
ANY ATTEMPT TO SELF-SERVICE YOUR DEVICE, UNLESS INSTRUCTED BY HAIRMAX
CUSTOMER SERVICE, WILL VOID YOUR WARRANTY.
HairMax has advanced electronics to ensure that the device is working like it is
supposed to and that the proper amount of laser energy is being delivered. If for
some reason you are experiencing diffi culties with your device, please try one of
the tips below:
If your HairMax will not turn on
• Make sure your HairMax is fully charged.
• Press the power button for 4 seconds and then the laser button.
• Try another electrical wall outlet.
5