HAMPTON BAY REDWOOD VALLEY FSS60428RST Guía De Uso Y Cuidado página 9

l
Chair Assembly (continued)
4
Attaching the support tube and the connector bars to the right leg
Please fully tighten the two bolts on both the connecting plates on the support tube (E), please see Figure 1.
Attach the support tube (E) to the right leg (G) using M8x28 hex bolts (BB), M8 spring washers (HH), and M8 washers (GG).
Attach the connection bars (F) to the right leg (G) using M6x20 bolts (CC) and M6 washers (FF).
Repeat this step for the left leg (H).
NOTE : Loosely tighten all bolts using the wrench (LL) and hex wrench (MM).
CC
FF
Figure 1
F
CC
FF
E
F
G
9
Please contact 1-855-HD-HAMPTON for further assistance.
BB
BB
HH
HH
HH
HH
GG
GG
HAMPTONBAY.COM