Getting Started - Waldbeck Clearflow 18 Manual De Instrucciones

Ceramic rings (optional)
Biochemically reactive cotton

Getting Started

As shown in figure 1, the locking buckles (1 and 2) should first be unfolded,
1
releasing the lid from the body.
Insert the drainage basket into the housing after inserting the appropriate filter
2
medium. Put the lid back on and close with the two closing flaps (1 and 2).
Pull the safety cap to remove the spigots. First bring the hoses and the
3
aquarium-side parts together and finally connect the hoses to the pump
nozzles. Finally, put the nozzle part back in place.
Activated carbon (optional)
Organic balls (optional)
EN
17