Temper KAQM-WIFI Manual De Instrucciones página 14

3. Operating instructions
Charging ：
1.
When the battery is too low (
When the power supply is full, it will automatically stop charging (
2. Turn On/Off
Turn On：Press Power/change key for 3 seconds, power on.
Turn Off：Press the power/modify key for 3 seconds under the main interface and turn off the computer.
：
Connect to the charging socket through the micro USB port to charge the equipment.
3.
Interface switching
Boot default access to the main interface, in the main interface by pressing the P key to switc h the home screen to monitor the
project, press the T key to switch other functional interface.
4.
Time setting
In the main interface, press the T key to switch to the time setting interface and then press the P key to enter the setting, in which
the P key is used for numerical selection, the T key switches the position to be set, when the setting cursor moves to the last bit, then
press the T key to confirm the time setting and exit the time setting.
Parameters
Year
Month
Day
Hour
Minute
) ，connect the matching Micro
USB cable to the Micro
-
).
-
Table 3
1:Time setting
-
USB port and start charging (
-
Range
2000 - 2099
01 12
-
31(28 31 Depends on the month)
01
- -
00 - 23
00 - 59
).