Connection Diagrams - Triton Blue TR8-RDM-DMX Manual De Usuario

CONNECTION DIAGRAMS

1. Connect signal out from your RDM/DMX controller to RDM/DMX In from front or rear panel of this unit.
2. Use the 8 outputs to send RDM/DMX signal to your DMX fixtures.
3. A RDM/DMX splitter unit is required when DMX cable run is more than 100 meters or there are more
than 32pcs DMX device in a line.
RDM/DMX Controller
WARNING !!!
Disconnect mains supply before making any type of connection.
.
8.
RDM/DMX Splitter
User Manual | TR8-RDM-DMX by Triton Blue | October 2021 | www.triton-blue.com
RDM/DMX Splitter