Electrical Connections - Infiniton VT-132M Instrucciones De Instalación

OPERATING INSTRUCTIONS:
1) Turn on power and check operation of fan . The pull chain controls the fan as follows: One pull-high
speed; two pulls-medium speed; three pulls-low speed; four pulls "OFF".
2) If regulator speed controls being applied, the regulator controls the fan as follows: Turn control knob to
position "1" (slow speed), then increase as required ins steps to position "5" (full speed).
3) The slide switch controls "FOWARD" and "REVERSE". Be sure turn off the power source before reverse
the fan.
WARMER WEATHER OPERATION:
Air Flow Direction Downward. Speed Medium to Full Speed. In warmer weather, your ceiling fan will let
you reduce your use of air conditioning, keeping the air moving to help you cool.
COOL WEATHER OPERATION:
Air Flow Direction Upward. Speed Low to Medium.
In cooler weather upward airflow reduces drafts while moving hotter air off the ceiling. The exact speed
will depend on the size of the room, number of fan, ceiling height, etc.. It should be fast enough to break
up the air stratification , but slow so as not to créate a breeze.

ELECTRICAL CONNECTIONS:

Connect black to live, white to neutral , and green grounding lead to the grounded conductor of the
supply circuit. If you are installing a light kit, connect blue or red to live of the supply circuit. Use wire
connectors provided with your fan.
NO LOOSE STRANDS or LOOSE CONNECTIONS SHOULD BE PRESENT. After splices are made, the wires
must be spread apart so that Green and White are on one side of the outlet box and the black (and blue
or red if light kit is installed) are on the other side. Turn splices upward and carefully push hall wiring into
outlet box. For optional wall controls, see Fig.8B, 8C, 8D. (Note: Regulator control fan speed only, cannot
use in light kit.)
(A) FOR CONTROL OF FON AND OPTIONAL
LIGHT FROM FAM LOCATION
SUPPLY CIRCUIT
BLACK WHITE GROUNDED CONDUCTOR
GREEN GROUNDING LEAD
BLUE OR RED BLACK FAN WHITE
LIGHT LEAD LEAD (COMMON)
MOTOR
BLUE OR RED WHITE
BLUE OR RED WHITE
LIGHT
WIRING BOX
(B) FOR CONTROL OF LIGHT ONLY
FROM WALL SWTCH
SUPPLY CIRCUIT
BLACK WHITE GROUNDED CONDUCTOR
WIRING BOX
GREEN GROUNDING LEAD
LIGHT
SWITCH
BLUE OR RED BLACK FAN WHITE
LIGHT LEAD LEAD (COMMON)
MOTOR
BLUE OR RED WHITE
BLUE OR RED WHITE
LIGHT
07