EN
Technical Specifications
Specifications
G30
30mbar
Injector
Gas Category
13B/P
Strong burner
Ø 0.65
Normal burner
Ø 0.60
Auxiliary Burner
Ø 0.50
Your stove is designed to operate by G30 29mbar (LPG) gas. It is not possible to convert the
stove to operate by different gases.
Use 1.5 kg/300mm SS Pressure-reducing valve on your stove as per TSE standards.
This product is designed to operate outdoors only.
Technical specifications may be changed without prior advice in order to improve product
quality.
Figures given in the manual are schematic and they may not exactly match with your product.
The declared values on the markings of the products or in other printed documents provided
together with the product are values obtained in laboratory as per the respective standards. These
values may vary depending on the use and environment of the product.
2)
Important safety instructions
This section contains safety instructions that may help prevent risks of personal injury or property
damage. If you fail to observe these instructions, the warranty will become invalid.
General Safety
This product is not designed by any handicapped people, mentally, physically and sensually
or by any people having no knowledge and experience (including children) unless they are
attended by a person that may assume their safety or give directions for use of it. The
children will be supervised and they will never be allowed playing with the product.
TECHNICAL SPECIFICATIONS OF THE PRODUCT
Single
Dual
Triple
Stove
Stove
Stove
13B/P
13B/P
13B/P
1.85 KW
1.85 KW
1.85 KW
1.50 KW
1.50 KW
1 KW
Quartet
Quartet
Quartet
Stove
Stove
Stove
13B/P
13B/P
13B/P
1.85 KW
1.85 KW
1.85 KW
2x1.50KW 2x1.50KW 2x1.50KW 2x1.50KW 2x1.50KW
1 KW
1 KW
1 KW
4
Quartet
Quartet
Stove
Stove
13B/P
13B/P
1.85 KW
1,85 KW
1 KW
1 KW