Selecline TAC-07CPB RM Manual Del Usuario página 6

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
9.
Always turn the product o and remove the power
plug from the socket when cleaning or for any other
EN
maintenance operation.
10. Do not attempt to remove any part of the casing unless
by an authorised technician.
11. Disconnect the plug from the socket if the product is
not being used for a long period.
12. The lter should be cleaned or replaced periodically to
prevent insu cient air ow caused by a build-up of dust
particles. Poor air ow will cause overheating, reduce
the performance of the product and add more risk.
13. Do not operate the product with damaged plug or
loose socket point.
14. This product contains non-serviceable parts. The
coolant gas in this product cannot be replaced/regased.
15. Allow at least 45cm of around and above space away
from the wall or other fournitures. Do not place the
product in front of curtains or drapes in case they fall
against the back air intake.
16. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly quali ed
persons in order to avoid a hazard.
17. If using this product with an extension lead do not
exceed the maximum rated wattage of the extension
lead.
18. Do not use this product in bathrooms or wet room
environments/locations.
19. The product shall not be installed in a laundry room.
20. The product must not be used in closed cupboards
or changing rooms. Do not cover the product with
clothing or any other fabric.
21. The product must be kept at a suitable distance from
walls, furniture and curtains to prevent them from
overheating due to poor ventilation.
22. The product should not be used when no one is at
home. If you are away for long periods of time, turn o
the power and remove the plug from the socket.
6

Publicidad

Tabla de contenido
loading

Productos relacionados para Selecline TAC-07CPB RM

Este manual también es adecuado para:

152149

Tabla de contenido