Eu Declaration Of Conformity - DRESSER RB 1700 Instalación Y Puesta En Marcha

Manufacturer:
Applied conformity assessment
procedures PED:
Applied harmonized standards:
Other applied EC-Directives:
Engaged notified body:
Module D, Surveillance of the QS-System: TÜV SÜD Industrie Service GmbH, Westendstraße 199, D-80686 München
Examination/inspections/tests
during manufacturing:
Surveillance of the QS-System:
Regulators according to EN 334 - if not equipped, with any electronic device – do not have a potential ignition source and
therefore are not in the scope of European directive 2014/34/EU.
D2035935_AB_EU_Declaration_RB1700_1800.docx
4

EU Declaration of Conformity

gas pressure regulators for natural gas and all non-corrosive gases
with or without safety shut-off valves for OPSO and UPSO
Itron GmbH, Hardeckstraße 2, D-76185 Karlsruhe
declares under his sole responsibility, that the regulator
RB 17xx / RB 18xx / RB 18xx-F
is in conformity with the Pressure Equipment Directive 2014/68/EU
The regulator with our without safety shut-off valve has been classified as pressure
accessories in category II, by the manufacturer. The used fluids are classified in
group 1 according article 13.
Module D1
DIN EN 334:2005+A1:2009 and DIN EN 14382:2005+A1:2009+AC:2009
2014/30/EU, electromagnetic tolerance
only for optional electronic device
TÜV SÜD Industrie Service GmbH, Westendstraße 199, D-80686 München
DGR-0036-QS-1164-17
Karlsruhe, March 1
_____________________
, 2017
st
P. Garcia
Head of Production