Preparation For Operation - UNIPRODO UNI TRAILER 18 Manual De Instrucciones

3.2. Preparation for operation

ASSEMBLY OF THE UNIT
1. Install the wheels to the axle of the trailer by placing each wheel on the
protruding tube in the side. Secure the installed wheels with a pin.
2. Lift the trailer up. Remove the safety pin from the rear hole in the two hitch
mounts (A).
Rotate the tow bar 180 degrees. Lock the tow bar by reinserting the safety pin
(B).
3. Unfold the trailer side panels to the upright position.
4. Curtain
5. Reflector
6. Towing bar