Emptying The Dirt Container - Kärcher 2.642-842.0 Manual De Instrucciones

Caution
The device must be secured and lifted ac-
cording to the regulations EN 13155. The
device may not be lifted centrally with one
fork of the forklift.

Emptying the dirt container

 Set the dirt container down on an even
surface.
 Clean the outer surface of the dirt con-
tainer so that sufficient adhesion of the
sleeve is ensured.
 Open the sleeve and place the dirt con-
tainer in the device.
A Support
B Bead
10
A
B
Note: Ensure that the dirt container is lifted
underneath the first bead, which is located
below the holder.
 Close sleeve.
D
A Eyelet
B Counter-nut
C Safety lock
D Clamping lock
 Adjust tension lock: Loosen the lock
nut, adjust the eye with a rotary move-
ment, retighten lock nut.
Note: Adjust the tension lock in a way that
the sleeve is in tight contact with the dirt
container.
 Close the tension lock and snap in the
safety lock.
 Lift the device by means of a crane or
forklift and bring it into the desired emp-
tying position.
– 3
EN
C B A