Thulos TH-CP1353 Manual De Instrucciones página 9

Before Each Use.
- Check that the blades are correctly adjusted.
- Make sure the blades are clean and oiled.
- Inspect the power cable for any damage.
- The hair to be cut must be totally clean and dry.
Operation.
- Extend the entire power cable.
- Put the desired cutting comb.
- Before plugging in, make sure the On/Off button is in the Off position.
- Plug in the electrical current.
- Turn on the machine with the On/Off button.
- Start cutting hair.
- Once the haircut is finished, stop and unplug from the electrical current.
Cleaning the Hair Clipping Machine.
- Disconnect the power cable.
- Remove the cutting comb if you have it on.
- Clean with the cleaning brush to remove the remains of hair.
- Once you have cleaned the remains of hair, proceed to lubricate the blades.
LUBRICATE THE BLADES:
- Plug the machine into the electrical current.
- Turn on the machine.
- With the machine on, pour a few drops of lubricating oil on the blades.
- Leave it on for a few seconds to lubricate the blades with the oil.
- Turn off the machine and unplug from the electrical current.
9