3. After then insert the lid onto the bowl, then put the motor head
on and zip to the lid on place. Push the switch and start to process
the good. The blades will be blocked if it is overloaded when start.
Do reduce the amount of the food then go on.
4. Press the switch to chop the food, continue with another cycle if
the food is not sufficiently chopped. After processing, remove the
motor head, and then take off the splash guard from cup, pour
out the food. Do cleaning on the blades, splash guard and bowl.
WARNING
Do not use continuously for more than 15 seconds at a time.
If after those 15 seconds the food needs more chopping, it can be chopped
again for another 15 seconds.
Arrived at 30 seconds in these 2 cycles of 15 seconds, let the machine rest
for 2 to 3 minutes.
After 4 cycles of 15 seconds, the machine should be allowed to cool for 30
minutes.
Between cycle and cycle of 15 seconds the machine must rest 2 minutes
and 30 minutes every 4 cycles.
Failure to respect these operating times will cause a breakdown in the
machine and thus void the manufacturer's warranty.