Motion CM-36 Manual página 18

7 Set favourite position (optional)
18
8 Operate the blind
M OTI ON CM - 3 6 L I - I O N C UR TAIN MOT OR
Move the blind to a desired favourite position.
7.1
Activate program mode by shortly pressing the
7.2
program button. The curtain will start stepping and
the favorite position can be set.
Hold the centre button to save this favourite
7.3
position. The blind shortly stops stepping indicating
the favourite position has been saved.
Shortly press the program button to deactivate
7.4
program mode. The blind stops stepping and can
be operated.
Center
Channel
Selection
Center
Up
Remote control: Choose the
channel to which the blind
has been paired using the
channel button.
Down
Press the up or down button
to operate the blind. Press
the center button to stop the
blind. Use the left and right
button to move the blind in
small steps.
Pull control: Pull once to
move the blind to the end
positions.