Cleaning And Maintenance; Technical Specification - MPM MKR-03 Instrucciones De Funcionamiento

6. Slide the rotating speed selector (8) to set the cutter disk speed:
- "0" – slicer off
- "1" – low speed
- "2" – medium speed
- "3" – high speed
As a rule of thumb, the harder the food you are cutting, the higher cutting speed should be
used.
7. Turn on the slicer using the power switch (7): press and hold the front end of the switch after
sliding forward the lock in the middle. The slicer will stop as soon as you take your hand off
the power switch.
8. Keep moving the slider (5) forward and backwards while pressing food to the cutter using
the press (6).
IMPORTANT! Always use the press (6) when cutting small pieces of food.
IMPORTANT! Fresh bread can be difficult to cut. Move bread slices away as they are cut. Never cut hot bread.

CLEANING AND MAINTENANCE

1. Always unplug the appliance from the power outlet before cleaning.
2. Clean the appliance with a soft damp cloth or a paper towel.
3. Do not immerse the appliance in water or other liquids; do not wash it in dishwashers.
4. The knife blade can be detached to facilitate the cleaning. To do so, rotate the knob (4) in the
middle of the knife blade by 90 degrees clockwise.
5. Do not wipe with any sharp cloths that could scratch the surface.
6. Dry all the cleaned parts thoroughly.
7. The cutter blade (3), slicer platform (2) and food press (6) can be washed in water with deter-
gent, but remember to disassemble these components from the slicer first.

TECHNICAL SPECIFICATION

Technical parameters are indicated on the product nameplate.
Noise level: L = 85 dB
WA
Maximum continuous operating time: KB MAX = 3 minutes
Power cord length: 1.0 m
NOTE! MPM agd S.A. reserves its right to modify the technical data!
PROPER DISPOSAL OF THE PRODUCT
Poland This symbol on the product indicates that the product, after its lifetime, should not be disposed with other
household wastes. To avoid harmful influence on the environment and human health due to uncontrolled
waste disposal, dispose the waste device to the service point of waste household appliances or report
collecting it from home. In order to obtain detailed information about the location and how to dispose the
waste electrical and electronic equipment in a safe way, contact your retailer or local Department of Environmental
Protection. Do not dispose the device with other municipal waste.
(waste electrical and electronic equipment)
9