OPERATING GUIDANCE
Put 4 um4 batteries in battery case
•
Use a 3.5mm stereo earphone and plug in the earphone socket
•
To adjust volume lebel use the switch of on/off
•
Press reset then press scan button for the radio to hunt the frequency automatically, the you may
•
listen to the broadcast
When the soynd becomes weak or distorted and the fan's wind becomes weak, replace the batteries
•
with new one
You can use the fan, radio and torch together with 4 batteries, but when with external dc supply (DC
•
3v) you just can choose to use fan or radio and torch (only one at time)
Notes on batteries:
•
Align the batteries correctly
•
The dry batteries cannot be charged
•
To avoid damage from possible batteries leakage remove the batteries when the unit will not be
•
used a long time
FEATURES
Electronic tunning auto scan radio
•
Fm receiving, wireless reception
•
High tone fidelity, low noise, high sensitivity
•
Streamlined configuration, ingeniously construct
•
Knobs slightly touching
•
Built in dc jack (de 3v)
•
Powerful fan
•
Powerful torch
•
Mountaineer buckle
•
SPECIFICATIONS
Batteries: AAA (1.5)x4 (dc 3vv AAA x2 for fan) (dc 3v aaaz2 for radio and torch)
•
Radio frequency range: 88-108mhz
•
S/N 50 db
•
Resistor: 32"
•
Power output: 20 mw
•
Fan current: 200ma
•
Pagina 2