How To Calibrate; Care And Maintenance - FAR BDC ARDOISE CI Manual De Instrucciones

ENGLISH
the scale will measure and display the weight;
7. If necessary, place a container on the scale
and press " " to tare it. Then you can
weigh the item once the display has returned
to "0";
8. After finishing with the scale, press
" " for 3 seconds to switch the scale off.
Otherwise the auto shut-off will switch it off
after 120 seconds.

HOW TO CALIBRATE

1. Place the scale on a hard, stable surface.
In off mode, press the "
" buttons simultaneously for three seconds.
A stochastic code will appear on the display.
Release the "
press " " again.
2. Once "2kg" appears on the display, place a
2kg weight in the centre of the plate. Then
"5kg" will appear on the display, place a 5kg
weight in the centre of the plate. Several
seconds later "PASS" will appear on the
display before turning to measuring mode.
GB-6
" and "
" and " " buttons, then

CARE AND MAINTENANCE

• The scale is composed of sensitive electronic
parts; keep it away from any source of heat and
any environment with excessive moisture.
• For precise measurements, place the scale on a
flat, solid and non-slip surface.
• Remove the batteries if not using the scale for
extended periods, and store it in a clean, dry
place.
• Handle the scale with care. Do not let it fall.
• You can clean it with a damp cloth, and then
dry it with a dry, soft cloth.
• The scale must not be washed or submerged in
water.
• Do not place objects on the plate if you are not
weighing them.
• Do not disassemble the scale, this risks
damaging it.
ENGLISH
GB-7