Displays And Controls - IONIQ Skincare IONIQ ONE Instrucciones De Uso

Displays and controls

Bluetooth display
Flashes slowly while searching for a connection (max. 30 seconds).
Lights up constantly after a successful connection has been made.
Goes out when the connection has been lost.
Battery charge status
The faster the flashing, the lower the charge level (slow: < 5 minutes; fast:
< 2 minutes).
Flashes slowly when charging, lights up constantly when fully charged.
Cartridge status
Flashes when the cartridge is removed or replaced by another IONIQ product
with sprayer switched on. Goes out when original cartridge is reinserted.
Also flashes when the fill level of the cartridge is low. The faster the flashing,
the lower the fill level (have a spare cartridge ready).
IQ
Lights up constantly when the appliance is switched on.
Flashes in case of malfunctions (for information on possible solutions see
chapter 05 "Help with problems").
ON/OFF switch
Turns the appliance on and starts searching for a connection.
Press and hold for more than 10 seconds to reset the sprayer.
Trigger buttons
Press both trigger buttons with the appliance switched on to start
spraying; during spraying, one trigger button can be released again.
Press and hold both trigger buttons and the ON/OFF switch at the same
time to clean a clogged nozzle field with a concentrated jet.
When pressing and releasing the ON/OFF switch and the trigger buttons, you can
hear the pump pumping liquid out of or into the cartridge. These noises are normal
and no cause for concern.
English
7