OPERATING INSTRUCTIONS.
1. The door of the room must be closed for greater efficiency.
2. Plug in the radiator.
3. Turn on the radiator with the ignition switch (B).
If you turn on switch (I), the heating power is 800W.
If you turn on switch (II), the heating power is 1200W.
If you turn on both switches, the heating power is 2000W.
4. Turn the thermostat (C) to the desired temperature.
5. When the room reaches the desired temperature, turn the thermostat in the
direction anti-clockwise to the point right where the radiator goes off.
From there, the radiator will maintain that temperature in the room.
6. To turn off the radiator, turn the thermostat counterclockwise to zero.
7. Turn off the switch or switches (B).
8. Disconnect from electrical power.
IMPORTANT SECURITY INSTRUCTIONS.
- Never leave the radiator unattended while it is plugged in and switched on.
- While it is in operation, never cover it. It can cause fires.
- Always unplug the power when it is not in use.
- If you leave the radiator for a moment do not leave it on, turn it off.
CLEANING AND MAINTENANCE.
• The radiator must be unplugged from the electric current.
• If it has been on, wait for it to cool before cleaning it.
• Clean the appliance with a slightly dampened cloth.
• Never use abrasive or flammable products to clean the appliance.
• Never immerse the radiator in water.
• Clean the grilles with a duster, brush or vacuum cleaner.
• If you are not going to use the radiator for a long period of time,
Store it in a cool, dry place where it does not pick up dirt or dust.
• Always store in vertical position.
SPECIFICATIONS.
- Input Power: 220V- 240V / 50 - 60 Hz.
- 3 Heating Powers: 800W / 1200W / 2000W
- Fins with oil: 9
- Measurements of each fin: 150mm x 580mm.
- Adjustable thermostat.
- Overheat protection.
- Measurements (mm): 455x160x640