Xylem sensus PolluStat Manual De Instrucciones página 53

Then insert the screwdriver into one of the two openings at an angle of approx. 45° and carefully lift the handle up to approx.
90° (see picture 2). The upper housing piece of the calculator is then no longer latched on this side. Repeat this with the other
opening. Now the upper housing piece can be taken off.
Plug the interface module on the right side of the PC board (see picture 3). The cables are to be fed through the rightmost
cable feedthroughs into the calculator after removing the blind grommets. Close the calculator.
Protect the calculator against unauthorized opening using one of the numbered adhesive seals enclosed to the modules (stick it
upon the seal destroyed). The added bar code label can be used for the purpose of documentation.
Page 53 of 58
1080619050 / MH 4310 INT5 Stand: 2021_07_05 V 0001 Technische Änderungen und Irrtümer vorbehalten.