Wall Mounting - Oversteel KRYPTO Serie Manual De Usuario

KRYPTO
GAMING MONITOR SERIES

4. Wall Mounting

1
Open the package, take out the product with foam still attached, and gently place it on a desktop or table.
Stand Stem
Open the top cover of poly dragon, take out the film covering bag of the fuselage, and then place the
2
fuselage in the bottom cover of poly dragon. Take out the wall mounted adapter and 2 screws. Lock the
wall mounted adapter with two PM4 * 10mm screws.
Do not discard the original screws. These may be needed for future use.
3
Follow the directions received with your mount, stand, or accessory and install the monitor on the wall or fixture as desired.
This monitor only includes screws which may be used when
aaching the monitor to a VESA 75*75mm type mount. No VESA
mount or mounting accessory is included.
Wall mounted adapter
Screws
Mount
(not included)
Stand Base
EN
9