fourstargroup 11210533CB Instrucciones De Montaje

MODEL: 11210533CB
6 CUBE ORGANIZER
!
WARNING:
ADULT ASSEMBLY REQUIRED
Keep screws, small parts and plastic
bags out of children's reach during
and after assembly.
STEP 1
1.1 INSERT WOODEN DOWEL (3) TO SIDE PANEL (B) WITH GLUE (8).
1.2 INSERT PLASTIC DOWEL (4) TO CENTER PANEL (D)
WITH GLUE (8).
2X2PCS
DX3PCS
STEP 5
5.1 REPEAT THE SAME AS STEP 4.
5.2 FASTEN BOTTOM PANEL (E) TO SIDE PANEL (B) WITH SCREW (1).
D
C
D
B
1X2PCS
C
D
A
E
D
C
D
B
C
D
A
(5.2)
All manuals and user guides at all-guides.com
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS.
CARE SHOULD BE TAKEN IN THE UNPACKING AND
ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO
THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS
CAREFULLY. FOLLOW THEM STEP BY STEP.
ASSEMBLY TOOLS REQUIRED
MALLET
PHILIPS SCREWDRIVER
Do you have any questions? Missing small parts or hardware? If you need
assistance with the assembly of your 6 CUBE ORGANIZER please e-mail our
Customer Service Department at:
call us at (800) 639-3803 or (508) 473-7688
from Massachusetts area
Please include the following information in your email:
• Where item was purchased • Item, model, style or SKU number listed on
instructions or box • Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
STEP 2
2.1 INSTALL L-BRACKET (6) WITH SCREW (2) TO KICK PANEL (F).
**FOLLOW THE MARKING**
2.2 ATTACH KICK PANEL (F) TO BOTTOM PANEL (E) WITH
SCREW (2). TIGHTEN THE L-BRACKET (6).
2X4PCS
3X4PCS
F
F
E
STEP 6
6.1 ATTACH ANOTHER PIECE OF SIDE PANEL (B) AND TIGHTEN
WITH SCREW (1) TO THE PANELS.
6.2 INSTALL NAIL LEG (7) ON THE BOTTOM OF SIDE PANEL (B)
WITH HAMMER.
7X4PCS
C
(5.1)
B
C
A
NO
1 M3.5 x 32mm CHIPBOARD SCREW
2
M3 x 10mm CHIPBOARD SCREW
3 WOODEN DOWEL
4 PLASTIC DOWEL
5 POWER PIN
support@fourstari.com or
6 L-BRACKET
if calling locally
7
NAIL LEG
8 WHITE GLUE
STEP 3
3.1 FACE DOWN TOP PANEL (A) AND ATTACH SIDE PANEL (B)
AND CENTER PANEL (D) WITH GLUE (8).
3.2 FASTEN SHELF PANEL (C) TO SIDE PANEL (B) WITH SCREW (1).
6X2PCS
1X2PCS
STEP 7
ATTACH BACK PANEL (G) TO THE REAR POSITION OF STORAGE
WITH POWER PIN (5).
E
D
D
B
D
1X6PCS
5X30PCS
PARTS LIST AND HARDWARE
NO
HARDWARE LIST QTY
12 PCS
4 PCS
4 PCS
12 PCS
30 PCS
2 PCS
4 PCS
1 PC
STEP 4
4.1 ATTACH ANOTHER PIECE OF CENTER PANEL (D) WITH GLUE (8).
4.2 FASTEN ANOTHER PIECE OF SHELF PANEL (C) TO SIDE
B
D
A
(3.1)
C
B
D
A
FINISHED EDGE TO FRONT
(3.2)
This unit is intended for use only with the products and maximum weights
indicated. Use with other products or products heavier than the maximum
weights indicated may result in instability causing possible injury.
Furniture can tip over or break if improperly moved. Have a friend help
to lift and carry the unit to it's new location.
G
G
G
PARTS LIST
A TOP PANEL
B SIDE PANEL
C SHELF PANEL
D CENTER PANEL
E BOTTOM PANEL
F KICK PANEL
G BACK PANEL
PANEL (B) WITH SCREW (1).
D
B
C
D
1X2PCS
A
(4.1)
C
D
C
B
D
A
(4.2)
SHELF WEIGHT LIMIT
20 LBS (9.1 KGS)
QTY
1 PC
2 PCS
2 PCS
3 PCS
1 PC
1 PC
3 PCS