Important: Keep these instructions for future reference.
For helpful tips and instructions, please visit our website: www.northstatesind.com or contact our Customer Care
department via email: CustomerService@northstatesind.com l Phone (763) 486-1754 or Toll Free: (800) 848-8421
WARNING:
Failure to follow these warnings and the instructions could result in death or serious injury.
Read these warnings and the instructions carefully before installing and using this device.
• Adult installation required. Keep small parts away from children during installation.
• Properly store any extra or unused components out of reach of children.
• This device is intended to restrict access by young children to the contents of a cabinet or drawer,
but some children may still be able to defeat it.
• Replace the device if it becomes damaged or broken or fails to function properly.
DRAWER & CABINET TAB LATCHES
Parts included:
X10
X60
B
C
A
Installation
Step 1:
Determine install location, front or side of
cabinet / drawer. Clean and dry inside surface
of drawer / cabinet.
Step 2:
Attach adhesive to both the catch and tab
latch. On the catch, attach the adhesive to the
side with the hollow rectangular cut out. On
the tab latch, attach adhesive to the back flat
side of the top rectangular body.
Step 3:
Remove the adhesive backing and position the
catch approximately 1" from the inside top
edge of the drawer / cabinet (Figure 1). Align
the tab latch to engage with the catch (Figure
2). Once properly positioned, secure both the
catch and tab latch into place with the screws
provided (Figures 3 & 4).
Operation
To use: Open drawer / cabinet slightly and press the
tab latch down allowing it to clear the catch and fully
open (Figure 5). When closing the drawer / cabinet,
the tab latch will engage automatically (Figure 6).
To Disable: Press down on tab latch until you hear it
click (Figure 7).
Removal
Remove product by applying heat (hairdryer) for about one minute. Gently pull product away from surface.
Note: Any damage to the property during installation or removal of this product is the sole responsibility of the end user.
Care
Wipe clean with a soft cloth and non-abrasive cleaner.
DOOR KNOB COVERS
CAUTION:
This product will not necessarily prevent all accidents and is only a deterrent. It is not a substitute for proper adult supervision. Stop using
when child becomes old enough to defeat it. Regularly check for wear and correct positioning. DO NOT use product if damaged or broken.
FOR INDOOR HOME USE ONLY.
WARNING:
Adult installation required. Do not use this product to guard against toxic and dangerous substances or objects. These dangerous items
should always be kept "high-up" or placed in an area completely inaccessible to the child. Any damage to the property during installation or removal
of this product is the sole responsibility of the end user.
Installation
Step 1:
Adult installation required. Separate halves of Door Knob
Cover and place around door knob.
Step 2:
Reassemble Door Knob Cover by aligning all tabs and snap
in place. Door Knob Cover should spin freely.
Operation
To open door, simply press both side buttons on the Door Knob
Cover and turn knob.
INSTRUCTIONS FOR CHILDPROOFING
STARTER SET 6190
Tools suggested: Phillips screwdriver and pencil (not provided).
A. Screw
D. Catch Adhesive
D
B. Catch
E. Tab Latch Adhesive
C. Tab Latch
E
Front Installation
Install in the front of the
cupboards/ drawers
1 1
3
5
Side Installation
Install at the side of
the drawers
2
7
4
6
1
2
7
3
4
5
6