HH TESSEN TNA-2120SA Manual Del Usuario página 5

TNA ACTIVE LINE ARRAY SYSTEM
INTRODUCTION
The TNA-2120SA active subwoofer features dual HH custom designed 12-inch low frequency
drivers and three channel Class D amplifier. Totalling 4800 watts (peak), the TNA-2120SA is
capable of not only powering the internal dual driver subwoofer, but via two full-range outputs,
powering up to 6 x TNA-2051 mid/high enclosures simultaneously. Achieving a max SPL of
137dB with a frequency response of 52Hz – 20KHz (-10dB) with TNA-2051 fitted.
6 expertly crafted DSP modes efficiently optimise the audio response of the system to meet the
user's needs. Whether that's ground stacked flat response, or flown with subtle bass lift, the
TNA-2120SA comes equipped to support multiple applications, venues, and events as either a
portable or suspended loudspeaker system.
The acoustically optimised, 15mm plywood enclosure includes 8 x M8 Integrated fixing points,
that allow suspension via the TNA-BRK1 bracket (available separately) for an installed live sound
solution. Alternatively, linking with the TNA-DF1 dolly frame, transforms the TNA-2120SA in to
an easily transportable, live sound system. A perfect solution for rental companies and non-fix
installations.
APPLICATIONS
Bars And Clubs.
Ballrooms.
Worship.
Corporate AV events.
GETTING STARTED
This manual contains important information regarding correct and safe operation of your TNA system. Please read it thoroughly in order
to get the best performance and reliability from your HH product.
POWER CYCLE
Many products have large transient surges at turn on and off which can cause damage to your speakers. Following the sequence below for
power-up and the reverse for power down will prevent this from occurring:
1
VOLUME
0 10
SET VOLUME TO MINIMUM
4
INPUT
INPUT 1
CONNECT INPUT SIGNAL
© 2022 HH Electronics Ltd
Live Sound Reinforcement.
Conference / Speech.
Corporate AV events.
2
MUTE/PROT
POWER
CLIP
POWER SWITCH - OFF
5
POWER SWITCH - ON
Designed and Engineered in the UK by HH Electronics LTD.
POWER
I
0
POWER
I
0
LIVE SOUND & INSTALLATION
3
CONNECT POWER
6
VOLUME
0 10
SET VOLUME AS REQUIRED
EN
EN
MUTE/PROT
POWER
CLIP
5