Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Service: Blackmagic Camera Service
UUID: 291D567A-6D75-11E6-8B77-86F30CA893D3
Characteristics
Outgoing Camera Control (encrypted)
UUID: 5DD3465F-1AEE-4299-8493-D2ECA2F8E1BB
Send Camera Control messages
These messages are identical to those described in the Blackmagic SDI Camera Control
Protocol section below. Please read that section for a list of supported messages and required
formatting information.
For an example of how packets are structured, please see the 'example protocol packets'
section in this document.
Incoming Camera Control (encrypted)
UUID: B864E140-76A0-416A-BF30-5876504537D9
Request notifications for this characteristic to receive Camera Control messages from
the camera.
These messages are identical to those described in the Blackmagic SDI Camera Control
Protocol section below. Please read that section for a list of supported messages and required
formatting information.
Timecode (encrypted)
UUID: 6D8F2110-86F1-41BF-9AFB-451D87E976C8
Request notifications for this characteristic to receive timecode updates.
Timecode (HH:MM:SS:mm) is represented by a 32-bit BCD number:
(eg. 09:12:53:10 = 0x09125310)
Camera Status (encrypted)
UUID: 7FE8691D-95DC-4FC5-8ABD-CA74339B51B9
Request notifications for this characteristic to receive camera status updates.
The camera status is represented by flags contained in an 8-bit integer:
None
Camera Power On
Connected
Paired
Versions Verified
Initial Payload Received
Camera Ready
Send a value of 0x00 to power a connected camera off.
Send a value of 0x01 to power a connected camera on.
= 0x00
= 0x01
= 0x02
= 0x04
= 0x08
= 0x10
= 0x20
Información para desarrolladores
769
Publicidad
Tabla de contenido
